|
Published Articles >> Table of Contents >> Abstract
October 2007 (Vol. 40, No. 10)
pp. 42-51
Embedded System Design for Automotive Applications
Alberto Sangiovanni-Vincentelli, University of California, Berkeley
Marco Di Natale, Scuola Superiore S. Anna, Pisa
Full Article Text:
   
DOI Bookmark: http://doi.ieeecomputersociety.org/10.1109/MC.2007.344
Send link to a friend
| Abstract |
|
To optimize the system design and allow for plug-and-play of subsystems, automotive electronic system architecture evaluation and development must be supported with a robust design flow based on virtual platforms.
|
 References
|
[1] AUTOSAR Consortium Web page; www.autosar.org.
[2] R. Bosch, CAN Specification, v2.0, Stuttgart, 1991.
[3] M.G. Harbour, M. Klein, and J. Lehoczky, "Timing Analysis for Fixed-Priority Scheduling of Hard Real-Time Systems," IEEE Trans. Software Eng., vol. 20, no. 1, 1994, pp. 13–28.
[4] L. Sha, R. Rajkumar, and J.P. Lehoczky, "Priority Inheritance Protocols: An Approach to Real-Time Synchronization," IEEE Trans. Computers, vol. 39, no. 9, 1990, pp. 1175–1185.
[5] Y. Wang and M. Saksena, "Scheduling Fixed-Priority Tasks with Preemption Threshold," Proc. IEEE Int'l Conf. Real-Time Computing Systems and Applications, IEEE Press, 1999, pp. 328–337.
[6] M. Joseph and P.K. Pandya, "Finding Response Times in a Real-Time System," The Computer J., vol. 29, no. 5, 1986, pp. 390–395.
[7] K. Tindell, A. Burns, and A.J. Wellings, "Calculating Controller Area Network (CAN) Message Response Times," Control Eng. Practice, vol. 3, no. 8, 1995, pp. 1163–1169.
[8] P. Caspi and A. Benveniste, "Toward an Approximation Theory for Computerized Control," Proc. 2nd Int'l Conf. Embedded Software (EMSOFT 02), Springer-Verlag, 2002, pp. 294–304.
[9] E. Bini, M.D. Natale, and G. Buttazzo, "Sensitivity Analysis for Fixed-Priority Real-Time Systems," Proc. Euromicro Conf. Real-Time Systems, IEEE Press, 2006, pp. 10–20.
[10] R. Racu and R. Ernst, "Scheduling Anomaly Detection and Optimization for Distributed Systems with Preemptive Task-Sets," Proc. 12th IEEE Real-Time and Embedded Technology and Applications Symp., IEEE Press, 2006, pp. 325–334.
[11] M. Baleani et al., "Efficient Embedded Software Design with Synchronous Models," Proc. 5th ACM Int'l Conf. Embedded Software (EMSOFT 05), ACM Press, 2005, pp. 187–190.
[12] A. Benveniste et al., "The Synchronous Languages 12 Years Later," Proc. IEEE, vol. 91, Jan. 2003, pp. 64–83.
[13] C. Ferdinand et al., "Reliable and Precise WCET Determination for a Real-Life Processor," Proc. 1st Int'l Conf. Embedded Software (EMSOFT 01), Springer-Verlag, 2001, pp. 469–485.
[14] T.M. Forest, "The FlexRay Communication Protocol and Some Implications for Future Application," Proc. Convergence, SAE Press, 2006.
[15] A.L. Sangiovanni-Vincentelli, "Quo Vadis, SLD? Reasoning about Trends and Challenges of System Level Design," Proc. IEEE, vol. 95, no. 3, pp. 467–506.
[16] A.L. Sangiovanni-Vincentelli, "Defining Platform-Based Design," EETimes, Feb. 2002.
[17] A.L. Sangiovanni-Vincentelli et al., "Benefits and Challenges for Platform-Based Design," Proc. Design Automation Conf., 2004, ACM Press, pp. 409–414.
[18] F. Balarin et al., "Processes, Interfaces and Platforms: Embedded Software Modeling in Metropolis," Proc. 2nd Int'l Conf. Embedded Software, Springer-Verlag, 2002, pp. 407–416.
[19] C. Pinello, L. Carloni, and A. Sangiovanni-Vincentelli, "Fault-Tolerant Deployment of Embedded Software for Cost-Sensitive Real-Time Feedback-Control Applications," Proc. DATE Conf., IEEE CS Press, 2004, pp. 1164–1169.
[20] F. Balarin et al., Hardware-Software Co-Design of Embedded Systems—The Polis Approach, Kluwer Academic Publishers, 1997.
[21] B. Kienhuis et al., "A Methodology to Design Programmable Embedded Systems: The Y-Chart Approach," Embedded Processor Design Challenges: Systems, Architectures, Modeling, and Simulation—SAMOS, LNCS 2268, E.F. Deprettere, J. Teich, and S. Vassiliadis, eds., Springer, 2002, pp. 18–37.
[22] W. Zheng et al., "Synthesis of Task and Message Activation Models in Real-Time Distributed Automotive Systems," Proc. IEEE/ACM DATE Conf., IEEE Press, 2007, pp. 93–98.
[23] A. Davare et al., "Period Optimization for Hard Real-Time Distributed Automotive Systems," Proc. ACM Design Automation Conf., ACM Press, 2007, pp. 278–283.
Additional References
[1] J.A. Cook et al., "Control, Computing and Communications: Technologies for the Twenty-First Century Model T," Proc. IEEE, special issue on automotive power electronics and motor drives, vol. 95, no. 2, 2007, pp. 334–355.
|
 Additional Information
|
Index Terms- embedded computing, automotive electronics system design, AUTOSAR, model-based design, platform-based design
Citation:
Alberto Sangiovanni-Vincentelli, Marco Di Natale,
"Embedded System Design for Automotive Applications,"
Computer,
vol. 40,
no. 10,
pp. 42-51,
Oct.,
2007
|
|
RSS Feed